What’re the advantages of spray painting your car with compressed air? To start with, it could be a real cash saver in the long term. There is a large investment required in the initial purchase of the tools, but once you have it, you will begin saving cash on your projects from there on in.

Another great advantage is that you have more flexibility in the use of the compressed air. Air pollution is a big issue in our current world. Hence, the use of aerosol propellants are frowned upon. The best answer to this is the compressed air sprayer.

A great deal people shy away from utilizing compressed air sprayers because they think they’re too challenging. This is not the case. Once you get abit practice utilising them, there’s no way you will want to go back to the aerosol spray.

The best paint to use in these sprayers is enamel, but say you add an appropriate conditioner to the acrylic and latex paints then you can utilize them successfully also. This’ll permit the paint to flow the right way through the tube as it thins it down.

Prepare your working area the right way. Whenever you’re going to do whatsoever type of spray painting there would be a certain amount of over spray. Take all the appropriate safety precautions. Do your work in a well ventilated arena. Wear a mask for sanding. Be certain to wear goggles or preferably gloves.

Once you are all set then you are prepared to begin. You’ll want to grind or sand off any rust and corrosion or rough spots. Then you must be certain the car is absolutely clean and dry before you start the application. For oil based paints use mineral spirits, and for the latex ones soap and water will work fine, but rinse well.

If need be, prime the surface. Do your blending of the paints and thinners you have chosen to apply. This can be a messy job, so protect the mixing area with a drop cloth.

Now it’s time to turn on the air compressor. You want it to build up pressure while youre preparing your paint. You would require a few of the air for priming and testing. If you look on the compressor, you should see a regulator. This’ll permit you to set the pressure you require for the sprayer. Say you dont do this then the air flow will fluctuate and you’ll end up with irregular spraying.

Attach the hose coupling to the sprayer. It is important you’ve an air tight seal so be certain it is attached tightly and wrap the join with various Teflon tape if you want.

If you stick to the right instructions that came with your particular sprayer, it would walk you through every of the steps. To start with, practise the paint application on other object. This way you would get the feel of handling the sprayer and be able to judge the exact consistency of the paint application.

Bookmark It